Metal Containers

  • ONE 100 Galvanized Waste Container 150 litre

    FEATURES

    • The body and lid are manufactured from a single piece of 1.50 mm. thick iron sheet.
    • The body is twisted †from two pieces of iron sheet and reinforced by being pressed.
    • The opening of the body is surrounded by reinforced profile.
    • The lid is laminated from a single piece of iron sheet †in presser and reinforced.
    • There are trunnions for loading on the sides.
    • There are 2 wheels with a size of 150×45 which are †conformity with†TS EN 12532†standard and two feet.
    • The base and sides are completely welded.
    • Container is produced in accordance with the technical picture and technical specialities, galvanized in accordance with the †standard of TS EN ISO 1461 with the system of hot dipping galvanization.
    • in the front side can be written any requested things

  • ONE 101 Galvanized Steel Container 200 litre

    FEATURES

    • The body and lid are manufactured from a single piece of 1.50 mm. thick iron sheet.
    • The body is twisted †from two pieces of iron sheet and reinforced by being pressed.
    • The opening of the body is surrounded by reinforced profile.
    • The lid is laminated from a single piece of iron sheet †in presser and reinforced.
    • There are trunnions for loading on the sides.
    • There are 2 wheels with a size of 150×45 which are †conformity with†TS EN 12532†standard and two feet.
    • The base and sides are completely welded.
    • Container is produced in accordance with the technical picture and technical specialities, galvanized in accordance with the †standard of TS EN ISO 1461 with the system of hot dipping galvanization.
    • in the front side can be written any requested things

  • ONE 102 Galvanized Waste Container 400 litre

    FEATURES

    • Iron sheets which used by container are certificate by T.S.E. and galvanized.it can be manufactured any thickness
    • -The body is made of 2.00 mm. curled up in one piece of† iron sheet.
    • -Opening of the body 25.00 x40.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • There are no source in the mouth outside corner joints. Profile of the bottom were made method welding.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the
    • Wheel mounting bracket is 3.00 mm.
    • Container’s lid fits and no bad smell
    • Container lids are made of 1.50 mm. iron sheet and certifacated and galvanized.
    • The part to which the wheels are attached is bolted and reinforced with 4 mm sheet.
    • Demountable in the front side can be written any requested things
    • All of our productions are made with gas welding. It is more resistant than other sources.

  • ONE 103 Galvanized Steel Container 800 Litre

    FEATURES

    • Iron sheets which used by container are certificate by T.S.E. and galvanized.it can be manufactured any thickness
    • -The body is made of 2.00 mm. curled up in one piece of† iron sheet.
    • -Opening of the body 25.00 x40.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • There are no source in the mouth outside corner joints. Profile of the bottom were made method welding.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the
    • Wheel mounting bracket is 3.00 mm.
    • Container’s lid fits and no bad smell
    • Container lids are made of 1.50 mm. iron sheet and certifacated and galvanized.
    • The part to which the wheels are attached is bolted and reinforced with 4 mm sheet.
    • Demountable in the front side can be written any requested things
    • All of our productions are made with gas welding. It is more resistant than other sources.

  • ONE 200 Damper Lid Galvanized Waste Container 400 Liters

    FEATURES

    • -The body is made of 2.00 mm. curled up in one piece of† iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets† formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius,† with this protrusion the side iron sheets and body sheets† are uninterrupted merged from outboard with radius .
    • Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • The body source and the other† sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
    • The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
    • Container lids are made of 1.50 mm. iron sheet, lid† system† is made can be opening† around its axis and to lid are† given strengthening form.Opening handles on the lid,locked with osculation, reinforced with resistance increasing profile from inside.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 3.00 mm.
    • In the front side can be written any requested things
    • All of our productions are made with gas welding. It is more resistant than other sources.

  • ONE 201 Damper Lid Galvanized Garbage Container 800 Liters

    FEATURES

    • The body is made of 2.00 mm. curled up in one piece of† iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets† formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius,† with this protrusion the side iron sheets and body sheets† are uninterrupted merged from outboard with radius .
    • Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • The body source and the other† sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
    • The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
    • Container lids are made of 1.50 mm. iron sheet, lid† system† is made can be opening† around its axis and to lid are† given strengthening form.Opening handles on the lid,locked with osculation, reinforced with resistance increasing profile from inside.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed and fork sheet is 3.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 3.00 mm.
    • In the front side can be written any requested things
    • All of our productions are made with gas welding. It is more resistant than other sources.

  • ONE 300 Hot Dip Galvanized Waste Container 200 Liters

    FEATURES

    • The body and lid are manufactured from a single piece of 1.50 mm. thick iron sheet.
    • The body is twisted †from two pieces of iron sheet and reinforced by being pressed.
    • The opening of the body is surrounded by reinforced profile.
    • The lid is laminated from a single piece of iron sheet †in presser and reinforced.
    • There are trunnions for loading on the sides.
    • There are 2 wheels with a size of 150×45 which are †conformity with†TS EN 12532†standard and two feet.
    • The base and sides are completely welded.
    • Container is produced in accordance with the technical picture and technical specialities, galvanized in accordance with the †standard of TS EN ISO 1461 with the system of hot dipping galvanization.
    • in the front side can be written any requested things

  • ONE 301 Hot Dip Galvanized Waste Container 400 Liters

    FEATURES

    • The body is made of 2.00 mm. curled up in one piece of iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets† formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius .
    • Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • The body source and the other sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
    • The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
    • Container lids are made of 1.50 mm. iron sheet, lid system is made can be opening around its axis and to lid are given strengthening form.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed
    • Containers all inside and outside included lid minimum an average 80-90 micron coating thickness galvanized.
    • In the front side can be written any requested things

  • ONE 302 Hot Dip Galvanized Waste Container 500 Liters

    FEATURES

    • The body is made of 2.00 mm. curled up in one piece of iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets† formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius .
    • Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • The body source and the other sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
    • The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
    • Container lids are made of 1.50 mm. iron sheet, lid system is made can be opening around its axis and to lid are given strengthening form.
    • There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed
    • Containers all inside and outside included lid minimum an average 80-90 micron coating thickness galvanized.
    • In the front side can be written any requested things

  • ONE 303 Hot Dip Galvanized Waste Container 800 Liters

    FEATURES

    • The body is made of 2.00 mm. curled up in one piece of iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius .
    • Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
    • The body source and the other† sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
    • The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
    • Container lids are made of 1.50 mm. iron sheet, lid system is made can be opening around its axis and to lid are given strengthening form.
    • There are 4 carrying rollers with the size of 160×45 mm. , swivel 360, sheets 4mm.TS EN 12532
    • Containers all inside and outside included lid minimum an average 80-90 micron coating thickness galvanized.
    • In the front side can be written any requested things-

  • ONE 304 – Hot Dip Galvanized Waste Container 1100 Liters

    FEATURES

    • The body is made of 2.00 mm iron sheet .
    • Given form with pressed and strength has been increased.Bottom are sheet metal and conical shaped.
    • The lifting arms and lid connection 3. mm. the steel is welded on the apparatus and screwed† to the body.
    • There are 4 carrying rollers with the size of 200 x50 and wide fork, swivel 360, two of them are with brakes, fork sheet is 4.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the
    • Wheel mounting bracket is 4.00 mm.
    • Containers all inside and outside††included lid galvanized in accordance with the standard of TS EN ISO 1461 with the system of hot dipping galvanizing
    • The container has the certificate of TS EN 840-3
    • In the front side can be written any requested things-

  • ONE 305 – Hot Dip Galvanized Waste Container With Dome Lid 1100 Liters

    FEATURES

    • The body is made of 1.60 mm. curled up in one piece of iron sheet ,given form with pressed and strength has been increased.Bottom corners are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets formed of at least 20 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius
    • The body welds and other welds boiled without slag with gas technology.
    • The body mouth is turned complete pipe profile.
    • The lifting arms and lid connection 2.50 mm. the steel is welded on the apparatus and screwed† to the body.
    • The lifting trunnions are made suitable for EN standart.The lid handles are 3.mm.
    • Container lids are made of 1.40 mm iron sheet, lid system is made can be opening around its axis and to lid are given strengthening form.The lid motion has helix sprung , there are 1 stop mechanism.
    • There are 4 carrying rollers with the size of 200 x50 and wide fork, swivel 360, two of them are with brakes, fork sheet is 4.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 4.00 mm.
    • Containers all inside and outside included lid galvanized in accordance with the standard of TS EN ISO 1461 with the system of hot dipping galvanizing
    • The container has the certificate of TS EN 840-3

  • ONE 400 Electrostatic Painted Waste Container

    • Our electrostatic painted waste containers are manufactured any requested colors and requested sizes.

  • ONE 400 – Ellipse Waste Container

    • The body is made of 2.00 mm. curled up in one piece of† iron sheet ,given form with pressed and strength has been increased
    • Combination of body 1.5 cm welded body by twisting.
    • Body opening 25 x 20 mm. it is surrounded by o profile.
    • The body source and the other† sources made by the technique of gaseous with dross-free
    • Lifting handles suitable for lifting arms on the vehicle are 45 x 10 cm. 4 mm in size. 16 mm. round handle, welded to the body by boiling from the top and bottom.
    • The dome model is plastered from one piece of sheet metal and it is ensured that it is durable and aesthetic.
    • There are 4 carrying rollers with the size of 160×45 and wide fork, swivel 360,TS EN 12532.
    • The container has been manufactured in accordance with the Technical Drawing and Technical Specifications and has been galvanized in accordance with TS 914 EN ISO 1461 standard with the complete Hot Dip Galvanizing system.
    • Container TS EN 840-2 Standard All suitable waste trucks can be taken.
    • The container is Oval, it does not keep garbage and dirt in it and it will last longer.
    • Galvanized coating thickness is 10 microns. The container is manufactured on hot dip galvanization, hot-dip galvanizing system, complete with all the surface after welding is completed (including sources) 80 to 90 microns thick galvannealed, longevity can be ensured.
    • Can be written anythings and models

  • ONE 500 – Solid Waste Waste Container

    FEATURES

    • BASE 4 mm. sheet metal, sides 3 mm. It is made of sheet metal.
    • Base frame 50 x 50 x 3 mm. 2 support profiles were thrown into the base.
    • The tank frame is surrounded by sides and front profile.
    • Corner joints are surrounded by brackets.
    • There are internal support profile on the Ceiling
    • 4 lifting arms 15 x 20 cm. welded to the body with platinum
    • 4 corners of the bearing shaft.
    • The inside is covered with emilkot and the outside is painted with primer and 2 layers of industrial paint.

  • ONE 501 – Solid Waste Swing Container

    FEATURES

    • Base 5mm ST 37 sheet
    • Side, front, and rear 54mm ST 37 sheet
    • Length: 3.40 meters
    • Width: 1.75 meters
    • Height: 1.50 meters
    • Right and left brackets 50 * 100
    • NPU other support materials 3 * 50 * 70 profile Color ral 2